Ağaç işleri endüstrisinde kullanılan verniklerin soğuk suya karşı dayanıklılıkları
- Global styles
- Apa
- Bibtex
- Chicago Fullnote
- Help
Abstract
ÖZET Bu araştırmada, ağaç işleri endüstrisinde en çok kullanılan ahşap malzeme cinsleri meşe, çam, kayın ile en çok kullanılan vernik türleri asit sertleştiricili, tek bileşenli, çift kompenentli poliüretan, selülozik, sentetik vernikler seçilmiş. Ahşap numunelerin tüm yüzeyleri verniklerle kaplandıktan sonra 20 °C'deki soğuk suda 2, 24, 48, 72 ve 144 saat süreler ile bekletilerek ağırlık, kalınlık, genişlik artışları tespit edilmiştir. Sonuç olarak, meşe ve çift kompenentli poliüretan vernik en iyi su geçirgenlik dayanımını göstermiştir. Anahtar Kelime : Ahşap, su geçirgenliği, vernikler, soğuk su dayanıklılığı Sayfa Sayısı : 100 Danışman : Prof. Dr. Ramazan ÖZEN ABSTRACT In this study, oak, pine and beech which are the most common wood in industry were selected to investigate water permeability under oil based alchid, double component polyurethane, acid hardener, synthetic and cellulosic. All wood samples werde covered with varnishes, and were dipped into 20°C cold water for 2, 24, 48, 72 and 144 hours. An increases in the dimensions and weight of the samples were determined in terms of the type of woods and varnishes, and holding time in the water. The results obtained showed that oak with covered double component polyurethane gives the best water permeability. Key words : Wood, Water Permeability, Varnishes and Resistance for cold water. Page number: 100 Supervisor : Prof. Dr. Razaman ÖZEN n
Collections