Show simple item record

dc.contributor.advisorÇavuşoğlu, Abdullah
dc.contributor.authorDurak, Derya
dc.date.accessioned2020-12-10T14:18:30Z
dc.date.available2020-12-10T14:18:30Z
dc.date.submitted1996
dc.date.issued2018-08-06
dc.identifier.urihttps://acikbilim.yok.gov.tr/handle/20.500.12812/305839
dc.description.abstractSÜPER YÜKSEK FREKANSTA LİNK TASARIMI (Yüksek Lisans Tezi) Derya DURAK GAZİ ÜNİVERSİTESİ FEN BİLİMLERİ ENSTİTÜSÜ OCAK-1996 ÖZ Tasarlanan bu link sisteminde 11 Gliz'de çalışan Düşük Gürültü Bloğu (LNB) diye adlandırılan aşağı ve yukarı konvertör devreleri kullanılmıştır. Verici kısmında yukarı konverlör, alıcı kısmında aşağı konvertör kullanılmıştır. Bu çalışmanın esas amacı verici kısmının tasarlanması olmuştur. Bu kısımda kullanılan LNB; 11 GHz'de çalışan Düşük Gürültü Amplifikatörü (LNA), aynı frekansta çalışan Mikser, 10 GHZ'de çalışan Osilatör (OSC) ve 1 GHz'de çalışan Ara Frekans Amplifikatör (İFA) den oluşmaktadır. Verici LNB 1 GHz'i 11 GHz'c yükseltmektedir. LNB'nin girişindeki 1 GHz'lik sinyali elde etmek için 1 GHz'de çalışan osilatör ve mikser devreleri oluşturulmuştur. Alıcı LNB ise 11 GHz'lik sinyali 1 GHz'e çevirmektedir. Receiver ise 1 GHz'i televizyon alıcısının kullanacağı frekanslara düşürmektedir. Bu sistemde parbolik antenler kullanılarak gürültüsüz, net bir resim kalitesi elde edilmektedir.
dc.description.abstractDESIGNING LINKS IN SUPER HIGH FREQUENCIES (M.Sc. Thesis) Derya DURAK GAZİ UNIVERSITY INSTITUE OF SCIENCE AND TECHNOLOGY JANUARY-I996 ABSTRACT In llic system that has been implemented up and down converter circuits, which work at 11 GHz arc used. These arc also known as Low Noise Block (LNB). In the transmitter part, an up converter and in the receiver part a down converter is used. The main purpose of this study was the design of transmitter part. The LNB which was used in this part consists of a Low Noise Amplifier (LNA) that works at 11 GHz, a mixer that works at the same frequency, an oscillator (OSC) working at 10 GHz, and an Intermediate Frequency Amplifier (IFA) that works at 1 Ghz. The transmitter LNB increases 1 GHz to 11 Ghz. To obtain 1 Ghz in the input of LNB an oscillator working at 1 Ghz and mixer circuits are used. The receiver LNB converts 11 Ghz signal to 1 Ghz. The receiver decreases this Î Ghz frequency to the frequencies that can be used by television. By using parabolic antennas in this system, a good quality picture is obtained. IIen_US
dc.languageTurkish
dc.language.isotr
dc.rightsinfo:eu-repo/semantics/embargoedAccess
dc.rightsAttribution 4.0 United Statestr_TR
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.subjectElektrik ve Elektronik Mühendisliğitr_TR
dc.subjectElectrical and Electronics Engineeringen_US
dc.subjectEğitim ve Öğretimtr_TR
dc.subjectEducation and Trainingen_US
dc.titleSüper yüksek frekansta link tasarımı
dc.typemasterThesis
dc.date.updated2018-08-06
dc.contributor.departmentDiğer
dc.subject.ytmLinks
dc.subject.ytmHigh frequency
dc.subject.ytmDesign
dc.subject.ytmTelevision broadcasting
dc.identifier.yokid55006
dc.publisher.instituteFen Bilimleri Enstitüsü
dc.publisher.universityGAZİ ÜNİVERSİTESİ
dc.identifier.thesisid55006
dc.description.pages134
dc.publisher.disciplineDiğer


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/embargoedAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/embargoedAccess