Recently added

IV ABSTRACT In this thesis, a heart rate monitor and digital thermometer has been designed and, built. This instru ment has low and high alarms for heart rate and tem perature. The device does not need frequent calibra ...

Conformational analysis of 2-sustituted cyclohexanones by force field calculations

Binzet, Namik Seyhun (BOĞAZİÇİ ÜNİVERSİTESİ/Fen Bilimleri Enstitüsü, 2018-08-06)

ÖZET Sikloheksanon bileşiklerinin iki kararlı koltuk kon- formeri vardxr. Birbirlerine dönüşebilen iki koltuk konfor- merin konformasyonal dengesi bileşik içindeki etkileşimlere başlıdır. Bu etkileşimler van der Waals ...

A practical application of hot air curing

Alev, Selim Tarik (BOĞAZİÇİ ÜNİVERSİTESİ/Fen Bilimleri Enstitüsü, 2018-08-06)

Effect of bar size and location on the lateral load behavior of post tensioned masonry

Aysoy, Sefer (BOĞAZİÇİ ÜNİVERSİTESİ/Fen Bilimleri Enstitüsü, 2018-08-06)

Biological treatability studies and design considerations for olive oil wastewater treatment

Çamlilar, Sezer Rifat (BOĞAZİÇİ ÜNİVERSİTESİ/Fen Bilimleri Enstitüsü, 2018-08-06)

FEN BİLİMLERİ ENSTİTÜSÜ: Recent submissions

An optimization model for ports ﻿

Effect of geometry on heat transfer to boiling liquids from longitudinal fins ﻿

Temperature analysis of cooled gas turbine baldes: A 3D isoparametric finite element approach ﻿

A study on the relationship between the hardness and the tensile properties of metals ﻿

Erosion assesment of an experimental coal gas turbine by computer models ﻿

Development of the correlation between hourly and daily values of solar radiation and its application to obtain hourly radiation on a vertical surface ﻿

Deposit removal in turbulent flows due to viscous sublayer activities ﻿

Wave propagation in isotropic two phase viscoelastic mixtures ﻿

A universal formulation for the calculation of global solar radiation and the determination of the solar map of Turkey ﻿

A black liquid collector for use in Turkey ﻿

The combustion rates of homogeneous mixtures ﻿

Finite element analysis of two dimensional incompressible fluid flow problems ﻿

Internal combustion engine powered total energy module ﻿

Flame stability in a continuous combustion chamber ﻿

Wind effects on buildings and structures: dynamic model tests for the investigation of the effect of changing the angle of attack in low speed wind tunnel flow on the dynamic response of the rectangular flat plates ﻿

Digital heart rate monitor and clinical thermometer ﻿

Conformational analysis of 2-sustituted cyclohexanones by force field calculations ﻿

A practical application of hot air curing ﻿

Effect of bar size and location on the lateral load behavior of post tensioned masonry ﻿

Biological treatability studies and design considerations for olive oil wastewater treatment ﻿

An optimization model for ports

Effect of geometry on heat transfer to boiling liquids from longitudinal fins

Temperature analysis of cooled gas turbine baldes: A 3D isoparametric finite element approach

A study on the relationship between the hardness and the tensile properties of metals

Erosion assesment of an experimental coal gas turbine by computer models

Development of the correlation between hourly and daily values of solar radiation and its application to obtain hourly radiation on a vertical surface

Deposit removal in turbulent flows due to viscous sublayer activities

Wave propagation in isotropic two phase viscoelastic mixtures

A universal formulation for the calculation of global solar radiation and the determination of the solar map of Turkey

A black liquid collector for use in Turkey

The combustion rates of homogeneous mixtures

Finite element analysis of two dimensional incompressible fluid flow problems

Internal combustion engine powered total energy module

Flame stability in a continuous combustion chamber

Wind effects on buildings and structures: dynamic model tests for the investigation of the effect of changing the angle of attack in low speed wind tunnel flow on the dynamic response of the rectangular flat plates

Digital heart rate monitor and clinical thermometer

Conformational analysis of 2-sustituted cyclohexanones by force field calculations

A practical application of hot air curing

Effect of bar size and location on the lateral load behavior of post tensioned masonry

Biological treatability studies and design considerations for olive oil wastewater treatment