Show simple item record

dc.contributor.advisorİnalhan, Gökhan
dc.contributor.advisorKaya, Metin Orhan
dc.contributor.authorCihan, Melahat
dc.date.accessioned2021-05-08T08:16:15Z
dc.date.available2021-05-08T08:16:15Z
dc.date.submitted2011
dc.date.issued2018-08-06
dc.identifier.urihttps://acikbilim.yok.gov.tr/handle/20.500.12812/645824
dc.description.abstractBu tezin konusu İstanbul Teknik Üniversitesi Kontrol ve Aviyonik Laboratuvarı tarafından yürütülen ve TUBİTAK tarafından desteklenen ITU pSAT II uydu projesinin yapısal altsistemiyle alakalıdır.Bu tez, genel olarak küp uydular hakkında kısa bir tarihçe vererek başlıyor ve sonra özel olarak ITUpSAT I'i tanımlıyor. İkinci bölüm Türkiye'nin ikinci küp uydusu olan ITU pSAT II'nin pek çok alt sistemi hakkında bilgi veriyor.Üçüncü bölüm özel olarak ITU pSAT II projesinin yapısal alt sistemi üzerinedir. Bu bölümde, uyduların tasarım felsefesi, fırlatma aracı, ayrılma sistemi, küp uydu standartları, uydunun yapısal ve fiziksel gereksinimleri ve malzeme ve fırlatma yükleri hakkında bilgi verilmiştir.Dördüncü ve beşinci bölümler küp uydular ve özellikle de ITU pSAT II yapısı için düşünülen iki farklı konsept tasarımı hakkındadır. Her ikisi içinde modelleme analizler ve sonuçlar tartışılmış ve sonuç olarak bunlardan biri seçilmiştir.
dc.description.abstractThis thesis is about the structure and mechanism subsystem of the ITU pSAT II satellite project of Control and Avionics Laboratory of Istanbul Technical University Aeronautics & Astronautics Faculty and supported by TUBITAK.This thesis will start by giving a brief history of cubesats in general, and then describes the specifically ITUpSAT I. Second chapter gives information about several subsystems of the second cubesat project in Turkey, ITU pSAT II.Third chapter is about specifically structural subsystem of the project ITUpSAT II. In this chapter, brief information is given for design philosophy of a satellite, launch vehicle, and deployment system, cubesat standardization, structural and physical requirements of the satellite and material and launch loads.Fourth and fifth chapters describes these two different concept design that built for cubesats and specifically ITU pSAT II. Modeling, analyzing and results are discussed for both of them and one is selected finally.en_US
dc.languageEnglish
dc.language.isoen
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rightsAttribution 4.0 United Statestr_TR
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.subjectHavacılık Mühendisliğitr_TR
dc.subjectAeronautical Engineeringen_US
dc.subjectUçak Mühendisliğitr_TR
dc.subjectAircraft Engineeringen_US
dc.titleA new conceptual structure design for nanosatellites
dc.title.alternativeNano uydular için yeni bir konsept yapı tasarımı
dc.typemasterThesis
dc.date.updated2018-08-06
dc.contributor.departmentHavacılık ve Uzay Mühendisliği Ana Bilim Dalı
dc.identifier.yokid406393
dc.publisher.instituteFen Bilimleri Enstitüsü
dc.publisher.universityİSTANBUL TEKNİK ÜNİVERSİTESİ
dc.identifier.thesisid295420
dc.description.pages79
dc.publisher.disciplineDiğer


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess