Show simple item record

dc.contributor.advisorBor, Mehmet Doğan
dc.contributor.authorErdamar, Aykut
dc.date.accessioned2020-12-30T09:31:31Z
dc.date.available2020-12-30T09:31:31Z
dc.date.submitted2001
dc.date.issued2019-09-24
dc.identifier.urihttps://acikbilim.yok.gov.tr/handle/20.500.12812/511603
dc.description.abstractÖZET Yüksek Lisans Tezi KONVANSİYONEL X-ISINI SİSTEMLERİNDE KALİTE KONTROL UYGULAMALARININ STAND ARDİZASYONU Aykut ERDAMAR Ankara Üniversitesi Fen Bilimleri Enstitüsü Fizik Mühendisliği Anabilim Dalı Danışman : Prof. Dr. Doğan BOR Bu çalışmanın amacı, radyografik ve floroskopik x-ışın sistemlerinin rutin kalite kontrol ve kabul testlerinde kullanılan alternatif tekniklerin belirlenmesi ve standart yöntemlerin çıkartılmasıdır. Kalite kontrolü yönünden olanakları farklı olan Radyoloji Bölümleri için referans bir kaynak hazırlanmıştır. Bu kapsamda, her bir yönteme ait teori verilmiş ve x-ışın sisteminin teknik parametreleri her bir yöntem ile ölçülerek sonuçlar karşılaştırılmıştır. Ankara Üniversitesi Tıp Fakültesi Radyodiagnostik Bölümünde ve Başkent Hastanesi Radyoloji Bölümünde yedi adet radyografik, üç adet floroskopik olmak üzere toplam on adet sistemde testler gerçekleştirilmiştir. 2001, 159 sayfa ANAHTAR KELİMELER : X-ışını, radyografi, floroskopi, standardizasyon, kalite kontrol, kabul testi, dozimetre, hasta dozu
dc.description.abstractABSTRACT Masters-Thesis STANDARDIZATION OF THE QUALITY CONTROL APPLICATIONS FOR CONVENTIONAL X-RAY SYSTEMS Aykut ERDAMAR Ankara University Graduate School of Natural and Applied Sciences Department of Engineering Physics Supervisor : Prof. Dr. Doğan BOR The purpose of this study is to determine the alternative techniques of routine quality control and acceptance tests of radiographic and fluoroscopic x-ray systems and, as well as derivation of standard methods. Therefore a reference test book which will respond to the needs of Radiology Department of different resources is prepared. The related theory specific to each technique is given, and technical parameters of the x-ray systems have been measured and results of each techniques are compared. Quality control and acceptance testing of seven radiographic and three fluoroscopic x-ray systems in Ankara University Medicine Faculty Radio Diagnosis Department and Başkent Hospital Radiology Department are carried out. 2001, 159 pages Key Words : X-ray, fluoroscopy, radiographic, standardization, quality control, acceptance test, dosimeter, patient doseen_US
dc.languageTurkish
dc.language.isotr
dc.rightsinfo:eu-repo/semantics/embargoedAccess
dc.rightsAttribution 4.0 United Statestr_TR
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.subjectFizik ve Fizik Mühendisliğitr_TR
dc.subjectPhysics and Physics Engineeringen_US
dc.titleKonvansiyınel X-ışın sistemlerinde kalite kontrol uygulamalarının standardizasyonu
dc.title.alternativeStandardizastion of the quality control applications for conventional X-ray systems
dc.typemasterThesis
dc.date.updated2019-09-24
dc.contributor.departmentFizik Mühendisliği Anabilim Dalı
dc.subject.ytmX ray
dc.subject.ytmQuality control
dc.subject.ytmRadiography
dc.subject.ytmStandardization
dc.subject.ytmFlouroscopy
dc.identifier.yokid113258
dc.publisher.instituteFen Bilimleri Enstitüsü
dc.publisher.universityANKARA ÜNİVERSİTESİ
dc.identifier.thesisid104559
dc.description.pages175
dc.publisher.disciplineDiğer


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/embargoedAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/embargoedAccess