Show simple item record

dc.contributor.advisorErgül, Rüyal
dc.contributor.authorÖzgün, Hüseyin
dc.date.accessioned2020-12-10T11:29:19Z
dc.date.available2020-12-10T11:29:19Z
dc.date.submitted1998
dc.date.issued2018-08-06
dc.identifier.urihttps://acikbilim.yok.gov.tr/handle/20.500.12812/260913
dc.description.abstractBu tezde yüksek hızda fiber optik haberleşme bağlantısı için gerekli olan gönderici ve alıcı devreleri ayrık elemanlarla baskı devre kartı üzerinde gerçekleştirilmiştir. Gönderici, 820 nm AlGaAs emitör ve emitörü TTL uyumlu girişten sürebilmek için gerekli anahtarlama devresinden oluşmaktadır. Alıcı devre, alıcı modülü tarafından optiksel sinyalden çevrilen elektriksel sinyali, TTL mantık seviyesinde elde etmek için sınırlayıcı amplifikatör ve mantık uyumlu karşılaştırıcı kullanmaktadır. Alıcı modülü PIN fotodiyot ve düşük gürültü empedans çevirici ön amplifikatörünü kapsamaktadır. Alıcı ve verici devreleri fiber optik kablo ile optiksel olarak bağlanmıştır. Fiber optik bağlantının performans değerlendirmesini yapabilmek için, 23 bit uzunluğunda yalancı-rasgele-bit-dizisi (YRBD) üreticisi kullanılmıştır. Optik hattın göz diagramları farklı uzunlukta kablolar kullanılarak, değişik sinyal seviyeleri ile analiz edilmiştir. Anahtar sözcükler : Fiber optik haberleşme bağlantısı, performans değerlendirmesi.
dc.description.abstractIn this thesis, transmitter and receiver circuits required for a high speed fiber optic communication link are implemented using discrete components on a single printed circuit board. The transmitter contains an 820 nm AlGaAs emitter and switching circuitry required to drive the emitter from TTL compatible input. The receiver circuit uses limiting amplifier and logic compatible comparator to obtain electrical signal at TTL logic level, converted from optical signal by the receiver module. The receiver module contains a PIN photodiode and low noise transimpedance pre-amplifier. The transmitter and receiver circuits are optically connected by communication grade fiber optic cable. To make a performance evaluation of the fiber optic link, a 23 -bit-long pseudo-random-bit-sequence (PRBS) generator is used. Eye diagrams of the optical link are analyzed at different attenuation levels and with different cable lengths. Key words : Fiber optic communication link, performance evaluationen_US
dc.languageEnglish
dc.language.isoen
dc.rightsinfo:eu-repo/semantics/embargoedAccess
dc.rightsAttribution 4.0 United Statestr_TR
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.subjectElektrik ve Elektronik Mühendisliğitr_TR
dc.subjectElectrical and Electronics Engineeringen_US
dc.titleImplementation and performance evaluation of a 50 megabits/second fiber optic link
dc.typemasterThesis
dc.date.updated2018-08-06
dc.contributor.departmentDiğer
dc.subject.ytmPerformance evaluation
dc.subject.ytmFiber optics
dc.subject.ytmCommunication
dc.identifier.yokid75698
dc.publisher.instituteFen Bilimleri Enstitüsü
dc.publisher.universityORTA DOĞU TEKNİK ÜNİVERSİTESİ
dc.identifier.thesisid75698
dc.description.pages80
dc.publisher.disciplineDiğer


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/embargoedAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/embargoedAccess