FEN BİLİMLERİ ENSTİTÜSÜhttps://acikbilim.yok.gov.tr/handle/20.500.12812/2925932024-03-28T18:28:50Z2024-03-28T18:28:50ZUV ışınları ile sertleşebilen nanokompozit kaplamaların uygulama ve karakterizasyonuBinici, Sinanhttps://acikbilim.yok.gov.tr/handle/20.500.12812/7345602023-09-22T11:38:28Z2011-01-01T00:00:00ZUV ışınları ile sertleşebilen nanokompozit kaplamaların uygulama ve karakterizasyonu
Binici, Sinan
Korozyon ve aşınma metal kayıplarında en önemli etkenlerden birisidir. Malzemeleri bu etkenlerden korumanın bir yolu da yüzeylerini kaplamaktır. Bu çalışmada, korozyon direnci yüksek, ancak aşınma direnci düşük olan Al plakaların yüzeyine, aşınmaya karşı direnci yüksek olan amin modifiye polieterakrilat ve silika ile çok amaçlı kaplama malzemesi geliştirmek amaçlanmıştır. Bu amaçla, iki farklı amin modifiye polieterakrilat, yedi farklı oranda silika nanoparçacık ve fotobaşlatıcı olarak sabit oranda onyum tuzu karıştırıldı. Bu karışımlar, eloksallanmış Al deney plakaları üzerine bir mastar yardımıyla sabit kalınlıkta sıvandı ve UV ışınlarıyla sertleştirildi.Hazırlanan çekme numunelerine; çekme deneyi, sertlik deneyi, SEM, ve EDS testleri yapıldı. Kaplanmış plakalara ise; parlaklık, kalem sertlik, çizilme, bant yapışma, aşınma deneyleri uygulandı. Yapılan deneyler ASTM ve DIN standartları dikkate alınarak yapıldı ve deneylerin sonuçları değerlendirildi.; Corrosion and attrition is one of the most important factors in metal waste. One of the ways to protect the metal stuff is to surface them. In this study, high corrosion resistance, low wear resistance, but the surface of the Al plates, a high resistance to wear with amine modified polyetheracrylate and silica a multi-purpose coating material with the aimed to develop. For this purpose, two different amine modified polyetheracrylate, seven different proportion of silica nanoparticle and onium salt photoinitiators were mixed as a constant rate. This combination, has been covered on anodized aluminum test tablets by means of a template and has been surfaced via being hardened by UV-rays.The tensile samples have been prepared with the tests of tensile test, hardness test, SEM and EDX tests. The covered plates have been prepared with the tests of brightness, pencil hardness, scratch resistance, tape adhesive, and abrasion tests. The tests in question have been realized in light of ASTM and DIN standards and the results have been assessed.
2011-01-01T00:00:00ZSürdürülebilirliğin yapı, yapı grupları ve mahalle yerleşimi bazında dönemsel değerlendirilmesiJahed, Sevılhttps://acikbilim.yok.gov.tr/handle/20.500.12812/7345572023-09-22T11:38:27Z2019-01-01T00:00:00ZSürdürülebilirliğin yapı, yapı grupları ve mahalle yerleşimi bazında dönemsel değerlendirilmesi
Jahed, Sevıl
Günümüzde üretim sistem ve teknolojilerin, iletişim ve ulaşım alanındaki gelişmeler kentsel arazi kullanımını konut alanları, açık ve yeşil alanlarını, tarihsel kültürel alanlarını etkilemektedir. Bu çerçevede kentlerin hızla büyümesi, yeterli konut sunumunun sağlanamaması, sağlıksız ve güvensiz çevrelerin artması ve yaşam kalitesinin yetersizliği gibi sorunlar kentsel sürdürülebilirliğe olan ilgiyi artırmaktadır. Zaten 20. Yüzyıl'dan beri planlama pratiklerinde yer alan ve kentsel alanda sürdürülebilirliğin ölçülmesinin en uygun birim olarak kabul gören mahalle birimi yeniden ön plana çıkmaktadır. Bu çalışma sürdürülebilir mahalle bileşenlerinin ilgili yazın üzerinden dönemsel olarak değerlendirmesi amacını taşımaktadır. Öncelikle Scopus veri tabanında sürdürülebilir mahalle kavramı taranmış, ilgili yazında yer alan 40 makale üzerine sürdürülebilirlik bileşenleri yapı, yapı grubu ve yerleşim bazında değerlendirilmiştir. Ayrıca gelişmiş ve gelişmekte olan ülkelerdeki yaklaşım farklılıkları yine dönemsel bazda incelenmiştir. Değerlendirme sonuçları çevresel ve planlama tasarım göstergelerinin ön plana çıktığını, sosyal, ekonomik ve kurumsal göstergelerin ise daha az yer bulduğunu göstermektedir. Ayrıca sürdürülebilirliğin sağlanmasında teknoloji ve tasarım boyutu daha fazla göstergelerde yer almaktadır. Sosyal sürdürülebilirliğe ilgi biraz daha artmasına rağmen özelliklede pazar güçlerinin etkisiyle bunun sağlanamadığı görünmektedir. Gelecekte çevresel, sosyal, ekonomik sürdürülebilirlik arasında dengeli ve bütüncül bir yaklaşım sağlanmasına ihtiyaç duyulmaktadır.; Today, developments in production systems and technologies, communication and transportation affect urban land use, housing areas, open and green areas, and historical cultural areas. Within this framework, problems such as the rapid growth of cities, the lack of adequate housing provision, the increase in unhealthy and unsafe environments and the lack of quality of life increase the interest in urban sustainability. The neighborhood unit, which has been in the planning practices since the 20th century and is accepted as the most appropriate unit for the measurement of sustainability in the urban area, has come to the fore again. This study aims to evaluate the sustainable neighborhood components periodically over the related literature. Firstly, the concept of sustainable neighborhood was scanned in the Scopus database and the sustainability components were evaluated on the basis of structure, building group and settlement on 40 articles in the related literature. In addition, the differences in approaches in developed and developing countries were examined on a periodic basis. The evaluation results show that environmental and planning design indicators come to the forefront and social, economic and institutional indicators find less place. In addition, technology and design dimension are more important indicators for sustainability. Although interest in social sustainability has increased slightly, it seems that this has not been achieved, especially with the effect of market forces. In the future, a balanced and holistic approach is needed between environmental, social and economic sustainability.
2019-01-01T00:00:00ZJelatin hidrojellerin kontrollü gübre serbestleşmesi ve mikrobiyal gübre sistemlerinde etkinliklerinin incelenmesiYoltay, Neşehttps://acikbilim.yok.gov.tr/handle/20.500.12812/7345582023-09-22T11:38:27Z2012-01-01T00:00:00ZJelatin hidrojellerin kontrollü gübre serbestleşmesi ve mikrobiyal gübre sistemlerinde etkinliklerinin incelenmesi
Yoltay, Neşe
Sunulan çalışmada bir seri jelâtin hidrojel sentezlenerek kontrollü gübre serbestleştiren ve azot üreten mikrobiyal sistemlerin üretilmesi ve etkinliğinin araştırılması hedeflendi. Bu amaç doğrultusunda farklı oranlarda glutaraldehit (GA) çapraz bağlayıcısı ve jelâtin kullanılarak hazırlanan hidrojellerin jelleşme yüzdeleri, şişme/bozunma davranışları incelendi. Çapraz bağlayıcı miktarının artmasıyla jelleşme yüzdelerinin arttığı belirlendi. Tüm hidrojellerin şişme değerlerinin zamanla arttığı ve yaklaşık 48 saat sonra dengeye ulaştığı gözlendi. Çapraz bağlayıcı miktarının artması ile şişme değerlerinin azaldığı saptandı. 30ºC'de ve pH=7,4'de en çok şişen hidrojelin J-3, en az şişenin ise J-2 hidrojeli olduğu bulundu. Sıcaklık artışıyla şişme değerlerinin arttığı ve 40ºC'de en yüksek değerine ulaştığı belirlendi. Hidrojellerin düşük pH değerlerinde çok şiştiği, pH arttıkça şişme değerlerinin düştüğü ve pH=5,0'den sonra şişme değerlerinin yeniden yükseldiği saptandı. Hidrojellerin bozunma davranışları 37ºC'de ve pH=7,4'de incelendi ve jelleşme yüzdesi en düşük olan J-3 hidrojelinin 34 günde, jelleşme yüzdesi en fazla olan J-2 hidrojelinin ise yaklaşık olarak 60 günde tamamen bozunduğu gözlendi.Jelâtin hidrojellerin tarımsal uygulamaları üç farklı aşamada incelendi. İlk aşamada hidrojellere mono amonyum fosfat (MAP), ikinci aşamada amonyum nitrat (AN) yüklenerek salım çalışmaları yürütüldü. Farklı hidrojeller için MAP salımının 38 ile 55 saat, AN salımının ise 36 ile 50 saat arasında tamamlandığı saptandı. Tarımsal uygulama çalışmasının üçüncü aşamasında, seçilen bir jelatin hidrojele nitrat üretiminde etkin bir bakteri olan Pseudomonas aeruginosa-78 bakterisi yerleştrildi. Hazırlanan bu hidrojel sistemin nitrat üretim verimleri ve raf ömürleri incelendi. Hidrojel içerisine yerleştirilen bakterilerin mikrobiyal gübre olarak işlev gördükleri ve etkinliklerini 14 gün süreyle koruyabildikleri belirlendi.; In the presented study, it is aimed to research the effectiveness of releasing controlled fertilizer and nitrogen producing microbial sytems by synthesizing a serial of gelatin hydrogel. To fulfill this aim, the gelatin percentages, swelling/decomposition behaviors of hiydrogels that were prepared by using diffirent rates glutaraldehyde (GA) cross linking and gelatin are examined. It was determined that the gelatin percentages increased when the amount of cross linking was increased. It was observed that the swelling values of all hydrogels were risen throughout the time but after 48 hours they reached their balance. It was found out that when the cross-linking amount increased, the swelling values decreased. It was seen that at 30ºC and pH=7,4 the most swollen hydrogel was J-3, the least swollen one was J-2. With the increase in heat, the swelling values heightened and they reached their highest values at 40ºC. The hydrogels bulged very much at low pH values, when pH increased the swelling values dropped and after pH=5,0 the swelling values decreased again. The decomposition behaviors of hiydrogels were examined at 37ºC and pH=7,4. The lowest gelation percentage of J-3 hydrogel decomposed in 34 days, the highest gelation percentage of J-2 hydrogel decomposed in almost 60 days.The gelatin hydrogels agricultural applications were examined in three stages. In the first stage mono-ammonium phosphate (MAP), in the second stage ammonium nitrate (AN) hydrogels were loaded to hydrogels. For different hydrogels, it was found out that the MAP release completed between 38 and 55 hours, and the AN release completed between 36 and 50 hours. At the third stage of the agricultural application study a Pseudomonas aeruginosa-78 bacterial which is an efficient bacterial in the hydrogel nitrate production was placed in a chosen gelatin hydrogel. This prepared hydrogel system nitrate production yields and their shelf-lives were examined. It was determined that the bacterials placed in hydrogel functioned as mycrobial fertilizer and kept their effectiveness for 14 days.
2012-01-01T00:00:00ZKentsel koruma çalışmalarında mekansal-sosyal yapı ilişkisinin Bitlis kent merkezinde örneklenmesiPayaslı Oğuz, Gülinhttps://acikbilim.yok.gov.tr/handle/20.500.12812/7345592023-09-22T11:38:27Z2011-01-01T00:00:00ZKentsel koruma çalışmalarında mekansal-sosyal yapı ilişkisinin Bitlis kent merkezinde örneklenmesi
Payaslı Oğuz, Gülin
Tez kapsamında incelenen Bitlis ili, farklı topografik konumu, bu topografyada konumlanan geleneksel konutların kentsel görüntüsü, anıtsal yapılar ile farklı açılardan birbirinden zengin vistalar veren bir geleneksel mimari zenginliğe sahiptir. Fakat bu kentsel dokunun kullanıcılarında zamanla değişim kaçınılmaz olmuştur. Geleneksel dokuda kullanıcı önemli bir faktördür. Bu nedenle, koruma yalnızca fiziki değil aynı zamanda sosyal içerikli olmalıdır; yani ?mimari yapı- sosyal yapı ilişkisi koruma çalışmalarında önemlidir? söylemi bu tezin temel hipotezini oluşturmaktadır. Hazırlanan kuramsal çerçevede bu ikilinin arasındaki karşılıklı ilişki incelenmiştir. Araştırma kapsamında Bitlis il merkezindeki geleneksel dokudaki alan çalışmalarında, inceleme-gözlem, görüşme-mülakat ve belgeleme çalışmaları yapılmıştır.Tez yedi bölümden oluşmaktadır. 1. Bölüm'de problemin tanımı yapılmış, amaç, kapsam, yöntem anlatılmıştır. 2.Bölüm'de tezin kuramsal çerçevesi oluşturulmuştur. 3.Bölüm'de önerilen metodolojinin uygulanacağı yer olan Bitlis hakkında yapılan araştırmalardan, fiziki, tarihi ve genel yerleşim özelliklerinden bahsedilmiştir. 4. Bölüm'de sosyal yapıyla ilgili olarak yerinde yapılan gözlemler ile yapılan anket çalışmalarının sonuçları S.P.S.S istatistik programı yardımıyla değerlendirilmiş ve Çizelgelar halinde aktarılmıştır. 5.Bölüm'de evlerin mimari özellikleriyle ilgili bilgi verilmiştir. Bu bilgiler hazırlanacak bir koruma çalışmasında veri oluşturabilmek için detaylı bir biçimde hazırlanmıştır. 6.Bölüm'de evlerin sosyal ve fiziki özelliklerinde görülen değişiklikler, bugünkü koşullar içinde değerlendirilmiştir. 7.Bölüm'de Bitlis ilindeki geleneksel konut birimiyle ilgili yapılan değerlendirme sonuçları tartışılmış, yöresel verilere göre alanın korunması için geleceğe yönelik öneriler getirilmiştir.; Bitlis province, which has been chosen for the subject of the thesis, has a different topographical location. The topography embodies images of the traditional urban houses located on the slopes, having vistas of the monumental buildings as well as vistas of traditional architectural richness from different angles. However, development of the users living at this urban texture is inevitably low. The user is one of the most important factors in traditional texture. Therefore, the conservation studies at the area should both in physical and social contents, i.e. ?the existence of the architectural-social structure evaluation is important/ essential at the conservation studies? this states the basic hypothesis of the thesis. The interrelation between them was examined at the theoretical framework.The studies on traditional texture of Bitlis province center were conducted on in-situ studies, examination-observation, and interview-documentation. The thesis consists of seven chapters. The definition of problem was introduced in the first chapter as well as aim, scope and the method. The theoretical framework of thesis has been carried out in the second chapter. A general description of the in situ, Bitlis province, and previous studies on physical, historical and settlement of the Bitlis was summarized and given in the third chapter. Chapter four contains the results of observation and interviews of the in-situ studies. The results were evaluated by SPSS programme and represented in tables in the chapter. The detailed architectural features of the traditional houses, as considering a data base for a conservation study were presented in chapter five. Chapter six presents current evaluations of changes in social and physical features of the houses. At chapter seven, a general discussion given on evaluation of spatial-social relationship of the study area/the output of the hypothesis. At chapter eight, traditional houses in Bitlis province was conducted and recommendations for conservation of the area in the future were presented.
2011-01-01T00:00:00Z